How tall is a tenpin bowling pin?
The USBC tenpin target height is 15.000 inches: 381 mm, or 38.1 cm. It is measured from the flat base to the crown of the upright pin. The specification allows heights from 14.969 to 15.031 inches, so 381 mm is the nominal target rather than a claim about every manufactured pin.
By Bigger vs · Published
Tenpin bowling pin measures 38.1 cm in height, about 1.3× the height of A4 sheet of paper (29.7 cm).
- A4 sheet of paper
- 29.7 cm (11.7 in)Tenpin bowling pin height is 1.28× this height · Height · A4 nominal long-edge height, not US Letter paper.
- Basketball
- 24 cm (9.45 in)Tenpin bowling pin height is 1.59× this diameter · Diameter · Diameter through centre.
- Soda can
- 12.2 cm (4.8 in)Tenpin bowling pin height is 3.12× this height · Height · Base to top of the illustrated can; pull tab does not extend above the rim.
Follow the whole pin from base to crown
The answer includes the rounded head, narrow neck and broad body. The two contrasting neck bands are surface markings; neither starts nor ends the height measurement. The USBC document also gives diameter stations at different heights. Those stations inform the illustrated contour, while the finish and intermediate curve joins are an interpretation rather than a manufacturing template.
Fifteen inches converts without rounding
An inch is 25.4 mm, so 15 × 25.4 gives 381 mm exactly. That exact unit conversion does not remove the product’s permitted manufacturing variation. The published lower and upper limits are slightly below and above fifteen inches. The nominal widest listed station is 4.766 inches across, at 4.5 inches above the base; width is a separate measurement from height.
A pin is taller than an A4 long edge
Place a 297 mm A4 long edge upright and the nominal pin reaches another 84 mm above it. That is about 1.28 A4 long edges. A basketball contributes its diameter, while the selected drink can contributes its height. Keeping those axes labelled avoids mistaking a round object’s circumference for its visible width. Candlepins and duckpins belong to different forms of bowling and need their own specifications.
Measurement and sources
- Adopted measurement
- 38.1 cm (15 in) · Height
- Measurement basis
- Published measurement
- Scope
- Nominal target height of a USBC tenpin, not candlepins, duckpins or an assertion that every manufactured pin is exactly381 mm. Published height tolerance is retained.
- Measured endpoints
- Flat base contact to the crown in a straight upright elevation. Neck bands and coating do not change the height.
- Source edition and location
- Equipment Specifications and Certifications Manual, printed pp20–21, footer last updated 10/25; accessed 2026-11-19 USBC Tenpin Specifications, Bowling Pin Dimensions p20: target Height 15.000 in, minimum14.969 in, maximum15.031 in. Original inches converted by15/12 =1.25 ft, then ×0.3048 =0.381 m; no rounding.
Read the complete measurement record · Inspect the illustration and measuring line · Open standalone SVG scale diagram
Source record checked . Guide reviewed .
Does a bowling pin have to be exactly 381 mm tall?
USBC specifies 15.000 inches as the tenpin target and permits 14.969–15.031 inches. This game uses the target height. The standard is specific to tenpins and should not be applied to candlepin or duckpin equipment.